Ghost Immobiliser
Ghost immobilisers are hidden security system that protects vehicles from being stolen. These systems protect your car against key cloning, hacking and relay theft by preventing the vehicle from starting.
They work silently and have no LED indications and don't use additional fobs and therefore cannot be hacked via the OBD port. Our TASSA verified Ghost II Immobiliser is compatible with most vehicles and is installed in a discreet manner with no wire cutting required.
CAN Based
A vehicle immobiliser is a piece of equipment that is fitted into a car, van or motorbike, lawnmower, or even machinery used to stop them from being stolen. This type of security device keeps the engine from getting started without an authorization code. These devices are very efficient and hard to defeat, making them a fantastic way to keep your car safe. They can also help lower your insurance premiums, as most insurers will offer discounts for vehicles with these devices installed.
Ghost is a CAN based immobiliser, which means it is directly integrated into your car's CAN data network. This is the most advanced immobiliser available. It is almost impossible to disable or bypass. ghost car immobiliser works silently and doesn't emit radio signals or LEDs, and can only be activated by pressing buttons in your vehicle. These buttons can be found on the steering wheel or center console. They could also be found on door panels. Each button is programmed to generate a unique pin code, which must be entered before the engine can begin. This code could be between four and twenty characters long. Ghost is an insurance approved immobiliser and has been awarded the TASSA certification for its safety and reliability.
Ghost is undetectable, unlike other types of immobilisers which can be defeated by using aftermarket keyfobs or by cutting wires. It doesn't include LED indicators or key fobs. Only the installers are aware of its existence. It also does not have any key-cut detection sensors that can be tampered with and it doesn't interfere with the engine's control unit. This means it's a foolproof solution to protecting your vehicle against modern thieves and hi-tech tactics.
The Autowatch Ghost II is designed to be inserted discreetly into the original wiring of your Peugeot. This allows the device be hidden from prying eyes, and also makes it impossible to be removed by thieves, as they would need to cut the main wiring harness to remove the immobiliser. The CAN immobiliser based on CAN can be removed by the driver in service mode, which is beneficial for when they have to hand their vehicle over for valet parking or for servicing.
No Key-Fobs or LED Indications
Ghost immobilisers, or an invisible security system, prevents thieves from cloning keys to cars and hacking into vehicles to take them. The system also prevents thieves from operating or driving your vehicle if they have the remote or key fob in their possession. The technology behind it makes use of the CAN data bus to immobilise your vehicle so that the engine will not start if the wrong pin code is entered. It is not affected by codes that scan for RF and are employed by high-tech thieves to bypass your car security since there aren't radio signals emitted.
Installation is easy and requires no cutting of wires. It can be positioned beneath the dash in a spot that is easy to access and is hidden from view. It is connected to the databus called CAN. It can be accessed using an individual PIN created by the user. This can be done on your dashboard or via an app accessible via your smartphone. It can be removed in less than a minute from the CAN bus without needing to turn off any functions in your vehicle or alarms.
This is a much more effective method of securing your vehicle than other methods, such as wheel locks or other physical deterrents. Thieves who want to take over your vehicle can be easily left wondering why your vehicle will not start and could cause them to believe that it is broken and leave the car in peace. This will give you a peace of mind and can help reduce the chance of theft from your pride and joy vehicle.
The Ghost immobiliser offers additional security for your car at a an affordable cost. It is more affordable than an alarm for cars and can be easily installed by one of our TASSA certified technicians. We will demonstrate how it works, and give you the owner's guide, emergency card, two Autowatch window stickers and an Installation Certificate.
There was no damage to the interior body of the vehicle.
Ghost is undetectable, in contrast to the majority of immobilisers available on the market. Ghost can be detected by diagnostic tools used by high-tech thieves to hack into car security. It doesn't use the radio signals or LED indicators. Rather it works directly with the CAN bus network and can be put in on any vehicle that utilizes this protocol. It's also completely wireless and can be deactivated and armed remotely via the Ghost iPhone or Android app. You can do this from any location provided your mobile has a good signal or if you are within a 5- 10m distance of the vehicle.
Autowatch Ghost is an immobiliser safety device developed by Autowatch which is a South African company. It protects you from hacking and key cloning as well as keyless entry. The code is entered by pressing a pattern of existing electrical buttons on your car.
In addition, the Autowatch ghost 2 immobiliser is connected to an international registry of vehicles, so in the event that your vehicle is stolen for parts, the thief will be unable to sell it since it will not have been registered. This gives you an extra layer of security when you have your car serviced, as the technician won't have access to your pin number.
During the process of installation the Tassa Registered Ghost 2 Immobiliser Installations team member will take you through a complete demonstration of how the system works and what it can do for your vehicle. We will also give you the owner's manual, installation certification and a Ghost emergency card.
Immobiliser ghost is a revolutionary new product created to combat the increasing issue of theft via contactless on our roads. It is a system which is constantly being developed and improved in order to provide the best protection for your vehicle. It's a simple method to add an extra layer of security and it can also be used to monitor your vehicle and alert you to any activity or vibrations that it detects such as someone attempting to start your engine.
Easy to Install
In contrast to other security devices for cars that require additional key fobs or wiring to operate, ghost immobilisers are integrated into the existing system. The device is undetectable, and does not require a key fob, remote or additional wiring. It is referred to as "Ghost.'
Our TASSA approved installers program a unique PIN sequence using buttons on the vehicle, like the steering wheels, centre consoles and door panels. This is exactly what you do when you start your vehicle. The engine won't start unless this code is entered correctly, making it difficult to determine the correct codes or fool the device into thinking it has been authorised.
The Autowatch Ghost II CAN immobiliser is compatible with a wide range of vehicle software, so you can also manage your car from any location. You can also check its condition using the app. If it detects a theft attempt you can lock your car remotely via the GPS feature. This feature provides peace of mind when you are away from your vehicle knowing that it is secured.
The Ghost immobiliser is also able to be transferred to another vehicle in the event that you decide to switch cars. The Ghost immobiliser can be transferred to a new vehicle if you decide to change your vehicle. This is provided that the new vehicle has the same CAN network as the old one and the Ghost has the same datapack size (memory) as the old one. This means you can take your Ghost with you wherever you go, protecting your prized possessions from cloning, hacking and even key theft.
The Ghost Immobiliser not only protects your vehicle from these methods it also stops thieves from bypassing the ECU of your vehicle and replacing it with after-market or generic units. This is because the device utilizes CAN data and cannot be detected by standard diagnostic tools and circuit cuts, or code-grabbing technology. This makes it a reliable and cost-efficient way to protect against modern-day thieves.